Theta Oilfield Services is the
leader in rod pumping software and provides a variety
of solutions that can help you optimize your wells regardless
of your level of rod pumping expertise.
Theta's most popular software is RODSTAR-V,
which is part of the Design and Simulation family. RODSTAR-V
is the most sophisticated and accurate design computer
program for non-deviated rod pumping system. With RODSTAR-V,
you can enter a "target" production (or IPR data) and
have RODSTAR-V automatically calculate the pumping
speed, plunger size, and the optimum rod string design
you need. For users that are interested in software
for their deviated rod pumping wells, Theta offers RODSTAR-D,
which provides all the functionalities of RODSTAR-V, but
with the ability to enter deviation data through a spreadsheet,
CSV file, or by entering the deviation yourself. RODSTAR-D
calculates side loading, buckling tendency, dogleg severity,
etc. and provides you with an interactive 3-D wellbore
plot to help you better visualize your wellbore deviation.
As an added bonus, RODSTAR-D includes a free license
for RODSTAR-V.
Our newest software in our Design and Simulation family
is XROD-V. XROD-V builds upon RODSTAR-V's design superiority
by implementing advanced Artificial Intelligence (AI)
to allow you to quickly come up with A+ designs automatically
in seconds. This AI system "learns" from its own runs
to become faster over time. XROD-V can design complete
rod pumping systems including how many sinker bars you
need, for up to eight pumping unit types simultaneously
from your input of target production and pump depth. XROD-V
also scores your system designs (A+,A, B, C, etc) and
provides recommendations if you enter your own designs.
As an added bonus when you purchase an XROD-V license
you also get RODSTAR-D and RODSTAR-V at no additional
cost. XROD-V can pay for itself the first few times you
use it. XROD-V has two modes: AI mode for new system designs
and non-AI mode for existing system optimization, scoring,
and recommendations.
Understanding that our users may need diagnostic analysis
software in addition to design and simulation software,
Theta offers RODDIAG and XDIAG. RODDIAG is a wave equation
based diagnostic analysis software that can read dynamometer
files from any dynamometer or centralized pump off control
systems. RODDIAG can calculate the downhole pump dynamometer
card from the surface card you entered. XDIAG is a revolutionary
software tool that combines state of the art expert system
and pattern recognition technology with accurate wave
equation diagnostic analysis for the ultimate accuracy.
XDIAG creates an expert report in English telling you
what are your pump condition and any problems it finds
with your system along with a score for your system design
using XROD's AI scoring technology. XDIAG is also used
in our XSPOC smart automation software for automatic analysis
of all your wells every day.
XSPOC is a comprehensive automation and well management
system that fully integrates all of Theta's software.
It uses modern communication technologies to link real-time
data from Rod Pump Controllers to Theta's powerful diagnostic
and design tools. XSPOC is not just for pump-off controllers
anymore. It now supports other wellhead devices including
ESP, PCP, Plunger Lift, Gas Lift and flow controllers.
Theta offers a 60-day pilot evaluation of XSPOC for a
very reasonable fee, which is fully reimbursable against
a purchase.
In addition to the software being offered above, Theta
also offers these other products:
XBAL
- Expert Unit Balancing
XBAL is the only program available that uses expert system
logic to make the calculations and recommendations that
you need to properly balance your pumping units.
XTOOLS
- Rod Pumping Utility
XTOOLS compliments the Design and Simulation Software
Family and Diagnostic Analysis Software Family. It allows
you to quickly calculate important system parameters for
an even better system design.
XANIMATE
- Educational Rod Pumping Animations
XANIMATE includes a collection of educational rod pumping
animations that will help you better understand how rod
pumping systems work.
Dynostar
- Data Acquisition
Dynostar is the first windows-based dynamometer data measurement
program.
T1
Dyno - Wireless Dynamometer System
T1 Dyno is the state of the art wireless Dynamometer System.
